Currently unavailable.
We don't know when or if this item will be back in stock.
Select delivery location

BIQU H2 Direct Extruder Upgrade Kit for Hurakan 3D Printer Equipped with BIQU H2 V2S Direct Dual-Gear Extruder, BIQU MicroProbe V2, BIQU 4020 Blower Fan, Hurakan Toolboard

4.2 4.2 out of 5 stars 8 ratings
Currently unavailable.
We don't know when or if this item will be back in stock.
  • 【Simple, Hassle-Free Installation】Fix the kit directly onto Hurakan with the compatible X carriage, connect the cable, and you're ready to start 3D printing.
  • 【BIQU MicroProbe, Leveling Made Effortless】Simplifies the process by enabling automatic bed leveling, giving you a smoother, streamlined printing.
  • 【BIQU H2 V2S Direct Drive Extruder】Boasts a dual-gear 7:1 ratio for 770N extrusion force and an adjustable tensioner, this kit shines in its ability to print various filaments, with a particular mastery over flexible ones like TPU.
  • 【Cooling Perfection, Precision in Every Print】Coupled with the 4020 blower fan & duct, offering 8000rpm rapid cooling, which solidifies the filament once it has been extruded from the nozzle, you'll achieve perfect prints every time.
  • 【Excellent Technical Support】We have provided installation instructions and firmware configuration guidance for each kit. If you encounter any problems during the use of the product, please feel free to contact us and we will do our best to solve your doubts. Thank you for choosing us.

Looking for specific info?

What's in the box

  • BIQU H2 Direct Extruder Upgrade Kit

    • Product information

    Feedback

    BIQU H2 Direct Extruder Upgrade Kit for Hurakan 3D Printer Equipped with BIQU H2 V2S Direct Dual-Gear Extruder, BIQU MicroProbe V2, BIQU 4020 Blower Fan, Hurakan Toolboard

    BIQU H2 Direct Extruder Upgrade Kit for Hurakan 3D Printer Equipped with BIQU H2 V2S Direct Dual-Gear Extruder, BIQU MicroProbe V2, BIQU 4020 Blower Fan, Hurakan Toolboard

    Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

    Where did you see a lower price?

    Fields with an asterisk * are required
    /
    /
    /
    /
    Please sign in to provide feedback.

    Product Description

    What's in the Box？
    H2 Direct Extruder Upgrade Kit x1
    Package Box x1
    User Manual x1
    BTT Duck x1
    Zip Ties x3
    Wrench Set x1
    I.D.2×O.D.4×20mm PTFE Tube x1

    Customer reviews

    4.2 out of 5 stars
    4.2 out of 5
    8 global ratings
    A few complaints but AWESOME PRINT QUALITY
    4 Stars
    A few complaints but AWESOME PRINT QUALITY
    I adapted this to fit on an Anycubic Kobra Go that's been heavily modded.My only complaints are- The blower fan sounded like it was going to rip itself apart and felt like it right out of the box. Luckily I had a spare on hand.- The bed sensor is in a total crap position, you can tell it was an afterthought, tack-on last minute job.- The PCB that comes on it is hard to find a cable for, or the pin out, or any reference at all for that matter.That's a bummer because BIQU is normally really good with this. It's why I have this, 2 of their accelerometers and two of the micro probes, and the SKR 3, and well ... Let's just say pretty much anything I buy aftermarket comes from BTT, and for good reason!last but not least, it PRINTS F N AMAZING!Modded Kobra Printer with "David Orlo Centered-Z" Mod
    Hide
    Thank you for your feedback
    Sorry, there was an error
    Sorry we couldn't load the review

    Top reviews from the United States

    Ford power
    5.0 out of 5 stars Better prints
    Reviewed in the United States on February 7, 2024
    Verified Purchase
    This was easy to install and has greatly increased print accuracy and has eliminated hot end from hitting print
    Helpful
     Report
    Amazon Customer
    5.0 out of 5 stars It works as it should
    Reviewed in the United States on November 18, 2023
    Verified Purchase
    You might have to need to have some experience with the wiring to the motherboard. Instructions are not very clear I've noticed. Other than that everything was in the box that you need to do the job. It works just fine.
    Helpful
     Report
    David M.O.
    4.0 out of 5 stars A few complaints but AWESOME PRINT QUALITY
    Reviewed in the United States on March 7, 2024
    Verified Purchase
    I adapted this to fit on an Anycubic Kobra Go that's been heavily modded.
    My only complaints are
    - The blower fan sounded like it was going to rip itself apart and felt like it right out of the box. Luckily I had a spare on hand.

    - The bed sensor is in a total crap position, you can tell it was an afterthought, tack-on last minute job.

    - The PCB that comes on it is hard to find a cable for, or the pin out, or any reference at all for that matter.
    That's a bummer because BIQU is normally really good with this. It's why I have this, 2 of their accelerometers and two of the micro probes, and the SKR 3, and well ... Let's just say pretty much anything I buy aftermarket comes from BTT, and for good reason!

    last but not least, it PRINTS F N AMAZING!

    Modded Kobra Printer with "David Orlo Centered-Z" Mod
    Customer image
    David M.O.
    4.0 out of 5 stars A few complaints but AWESOME PRINT QUALITY
    Reviewed in the United States on March 7, 2024
    I adapted this to fit on an Anycubic Kobra Go that's been heavily modded.
    My only complaints are
    - The blower fan sounded like it was going to rip itself apart and felt like it right out of the box. Luckily I had a spare on hand.

    - The bed sensor is in a total crap position, you can tell it was an afterthought, tack-on last minute job.

    - The PCB that comes on it is hard to find a cable for, or the pin out, or any reference at all for that matter.
    That's a bummer because BIQU is normally really good with this. It's why I have this, 2 of their accelerometers and two of the micro probes, and the SKR 3, and well ... Let's just say pretty much anything I buy aftermarket comes from BTT, and for good reason!

    last but not least, it PRINTS F N AMAZING!

    Modded Kobra Printer with "David Orlo Centered-Z" Mod
    Images in this review
    Customer image Customer image Customer image
    Customer imageCustomer imageCustomer image
    Helpful
     Report
    Adam
    1.0 out of 5 stars Returned 2
    Reviewed in the United States on January 5, 2024
    Verified Purchase
    First off the probe mounts on both were to high causing the nozzle to hit the bed first (no big deal I opened up the holes with my drill for adjustment)

    First failure was the microprobe wouldn't deploy unless manually deployed

    Second failure was a faulty thermistor that wouldn't read less than 200c
    Helpful
     Report

    Top reviews from other countries

    Translate all reviews to English
    Joe
    5.0 out of 5 stars Excellent, reliable head
    Reviewed in Canada on December 18, 2023
    Verified Purchase
    This head works beautifully on my biqu b1. I changed the carriage to the included hurrican part, but wired everything to my original USB-c expander. If a plug was included for the hurrican breakout board I would have done it differently. A fair bit of work to get it all done, but rewarded by much more reliable printing than the Bowden set up. I have never had a clog printing pce at 260 degrees with this setup. Couldn't be happier. Very easy to feed new filament. An order of magnitude improvement all around.
    One person found this helpful
     Report
    Bernhard Leers
    5.0 out of 5 stars Hobby
    Reviewed in Germany on March 2, 2024
    Verified Purchase
    Alles super danke
    Report