I've got this manometer to measure static pressures in my HVAC system. It is small, but convenient to use. It can measure positive, negative and differential pressures. I have no way to calibrate it right now, so have to trust its readings. Today I have measured 0.43 in H2O total external static pressure in my house, which is pretty good. You can also measure pressure drops over individual system components to find a restriction.
I had to buy a couple of probes for the measurements. They are typical bent tubes with small holes near the tip. The diameter of the barbs on the meter is 4.9 mm, very close to the barb size on the probes. The included silicone tubes measure 3 mm ID and 5 mm OD and fit both the meter and the probes just fine. The power comes from three 1.5V AAA cells. I have used rechargeable NiMH cells and they work just fine. For the future I can measure the pressure drop across the air filter to decide when it is the time to replace it. It is a useful tool in every household.
04-27-24 update. Today I was able to calibrate (kind of) my gauge against a precision calibrated Heise gauge. I was not able to go below 6 in H2O, but from 6 to 83 in H2O both gauges showed very close numbers. It was not a proper calibration, but it showed that I can trust this gauge. It even generated an overpressure error, when I slightly exceeded 83 in H2O.
Add to your order
-
Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary) -
24/7 support when you need it. -
Quick, easy, and frustration-free claims.
Cover this product:
2-Year Protection Plan $3.99
3-Year Protection Plan $5.99
Cover all of your eligible devices:
Asurion Complete Protect: One plan covers all eligible past and future purchases (Renews Monthly Until Cancelled) $16.99/month
Select a plan
Add to your order
- Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary)
- 24/7 support when you need it.
- Quick, easy, and frustration-free claims.
Cover this product:
Select a plan
Add Prime
to get Fast, Free delivery
$37.99 with 5 percent savings
Typical price: $39.99 
The Typical Price is determined using the 90-day median price paid by customers for the product in the Amazon store. We exclude prices paid by customers for the product during limited time promotions and prices paid in the Amazon Haul store
Learn more
Learn more
Frequently bought together
This item: EHDIS Manometer, Professional Air Pressure Meter, Dual-Port HVAC Digital Manometers Gas Pressure Tester Differential Gauge
$37.99
Get it as soon as Thursday, Apr 10
In Stock
+
$12.99
Get it as soon as Thursday, Apr 10
In Stock
+
$8.99
Get it as soon as Thursday, Apr 10
In Stock
Total price: $00
To see our price, add these items to your cart.
Choose items to buy together.
Frequently purchased items with fast delivery
Page 1 of 1 Start overPage 1 of 1
From the brand
-
how did we start
Since 2016 we focus on tools for car wrapping.
What makes our product unique?
All products are made in our own factory, and we research to develop better products for each customer.
Why do we love what we do?
We want to release our product to all customers, and we want your feedback to help us keep moving.
-
Window Tinting Tool
-
Vinyl Wrap Tool Kit
-
Tinting Tool
-
Car Accessories
Product Description
Digital Manometer Gas Pressure Tester
- This Manometer can measure the air pressure of the single pipe or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems.
- Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect.
Manometer Specifications and Parameters
- Selectable pressure range: ±2.999psi
- Accuracy: ±0.3%FSO (at 25°C)
- Repeatability: ±0.2% (Max ±0.5%FSO)
- Linearity/Hysteresis: ±0.29%FSO
- Response Time: 0.5 Seconds
- Over Range Indicator: Err 0
- Under Range Indicator: Err 1
- Operating Conditions:0 to 50°C (32 to 122°F)
- Storage Conditions: -10 to 60°C (14 to 140°F)
- Battery:4.5V(3*1.5V/AAA) NOT included batteries
Package included
- 1 x Manometer
- 1 x English User Manual
- 1 x Protector Bag
- 1 x Metal connector
- 2 x Rubber tube
Window Tint Tool Set
|
Plastic Scraper Set
|
Razor Blade Scraper Set
|
6 pairs Working Gloves
|
Rubber shower squeegee
|
|
|---|---|---|---|---|---|
| Customer Reviews |
9,009
|
10,637
|
2,670
|
549
|
5,917
|
| Price | $13.99 | $7.99 | $6.99 | $10.99 | $8.99 |
| Package | 7pcs vinyl wrap tinting tool | 1pc scraper +10pcs double edge blades | 1pc scraper +10pcs stainless steel blades | 6 pairs white working gloves | 1 pc 5 inch window squeegee |
| Material | Plastic,rubber,stainless | Plastic | Plastic,stainless steel | Nylon | Rubber,Plastic |
| Function | vinyl wrap,film wallpaper installation | Adhesive remover ,clean the stain | Adhesive remover ,clean the stain | Daily work | Cleaning bathroom Shower Mirror Door, Window, Car Glass |
| Durable | ✓ | ✓ | ✓ | ✓ | ✓ |
| Easy to use | ✓ | ✓ | ✓ | ✓ | ✓ |
Worked well, solved the problem, saved $$$
I bought this because I have a 10+ year old wall-mounted natural gas heater (Empire DV-35 SG) that has very low heat output. On full heat it is supposed to have a flame this is ~ 3” tall, but all I could see was maybe 1/4” tall flame. It would cost well over $1500 to replace this unit, or probably at least $500 to have it fixed.To analyze the problem one needs to measure the natural gas pressure on the supply side of the valve, and on the downstream side (for good vid search “diagnostic testing for gas pressure and gas millivolt valves“) The heater uses a Dexen 6003 millivolt valve; this valve has small pressure taps built in to the body of the unit. The diagnostic process involves turning off the gas supply, opening the supply side pressure tap, hooking up a pressure meter to the tap, then turning the gas back on to measure pressure. Then repeating this exercise on the downstream side of the valve. Published data say the upstream side pressure should be in the range of 5 to 8 inches of water and the downstream side should be ~ 3” of water. I had the option of trying to purchase a “magnahelic” guage (high quality, but expensive), try to set up a classic U-shapped glass tube with water, or purchase an inexpensive digital pressure gage. Despite a couple of mediocre reviews for this digitial manometer I thought the purchase price ($49) was worth the risk. I am not able to calibrate this manometer, so I have to trust the readings out of the box. It gave me 5.77 inches of water on the supply side (OK reading) and 4.2” of water on the downstream side: significantly too high. I interpreted this to mean that the output tube was partially blocked and causing back-pressure, which would be consistent with the very low flame and low heat output that I saw. Upon disassembly of the output tube and orifice I found a spider had built a nest inside and almost (but not quite) totally blocked the flow of gas. I removed the tube/orifice, washed it out, and now my heater is back to working perfectly.In my opinion, spending $49 for this tool, to save a minimum of $500 and possibly more than double that, was exceedingly worthwhile. Perhaps if I were a professional HVAC person who needed a rugged, calibrated, reliable tool, this model would be too simple and maybe not robust enough. But for the homeowner / DIY person this is an excellent solution and a terrific deal.A key point to add: this unit has small diameter tubes, 3/16”, to connect to the device you want to measure. The output taps on the Dexen valve are larger, ~ 1/4” or 5/15”. I needed to separately purchase an adapter that connects the larger diameter tube to the small dia tube that comes with the manometer. Part # RMA316 at Supply House.
Top reviews from the United States
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United States on April 22, 2024
- Reviewed in the United States on April 2, 2022
I bought this because I have a 10+ year old wall-mounted natural gas heater (Empire DV-35 SG) that has very low heat output. On full heat it is supposed to have a flame this is ~ 3” tall, but all I could see was maybe 1/4” tall flame. It would cost well over $1500 to replace this unit, or probably at least $500 to have it fixed.
To analyze the problem one needs to measure the natural gas pressure on the supply side of the valve, and on the downstream side (for good vid search “diagnostic testing for gas pressure and gas millivolt valves“) The heater uses a Dexen 6003 millivolt valve; this valve has small pressure taps built in to the body of the unit. The diagnostic process involves turning off the gas supply, opening the supply side pressure tap, hooking up a pressure meter to the tap, then turning the gas back on to measure pressure. Then repeating this exercise on the downstream side of the valve. Published data say the upstream side pressure should be in the range of 5 to 8 inches of water and the downstream side should be ~ 3” of water. I had the option of trying to purchase a “magnahelic” guage (high quality, but expensive), try to set up a classic U-shapped glass tube with water, or purchase an inexpensive digital pressure gage. Despite a couple of mediocre reviews for this digitial manometer I thought the purchase price ($49) was worth the risk. I am not able to calibrate this manometer, so I have to trust the readings out of the box. It gave me 5.77 inches of water on the supply side (OK reading) and 4.2” of water on the downstream side: significantly too high. I interpreted this to mean that the output tube was partially blocked and causing back-pressure, which would be consistent with the very low flame and low heat output that I saw. Upon disassembly of the output tube and orifice I found a spider had built a nest inside and almost (but not quite) totally blocked the flow of gas. I removed the tube/orifice, washed it out, and now my heater is back to working perfectly.
In my opinion, spending $49 for this tool, to save a minimum of $500 and possibly more than double that, was exceedingly worthwhile. Perhaps if I were a professional HVAC person who needed a rugged, calibrated, reliable tool, this model would be too simple and maybe not robust enough. But for the homeowner / DIY person this is an excellent solution and a terrific deal.
A key point to add: this unit has small diameter tubes, 3/16”, to connect to the device you want to measure. The output taps on the Dexen valve are larger, ~ 1/4” or 5/15”. I needed to separately purchase an adapter that connects the larger diameter tube to the small dia tube that comes with the manometer. Part # RMA316 at Supply House.
Images in this review
- Reviewed in the United States on January 22, 2025
- Reviewed in the United States on January 9, 2025
- Reviewed in the United States on March 6, 2025
Top reviews from other countries
-
-
Client d'AmazonReviewed in France on December 25, 2021
Manomètre gaz très intéressant
-
-
