Monoprice Gold Plated Speaker Banana Plugs – 5 Pairs – Closed Screw Type, For Speaker Wire, Home Theater, Wall Plates And More
Brand | Monoprice |
Connector Type | Speaker Wire to Banana Plug |
Compatible Devices | Speaker |
Recommended Uses For Product | Speaker |
Color | Gold |
About this item
- Can accept bare wire or spades. Can accept 12 to 18 AWG speaker wires.
- Color coded Black/red rings for maintaining proper polarity
- Secure, positive contact with binding posts
- Corrosion resistant, 24K Gold plated brass plug
- Each order includes five pairs (10 plugs total)
Save on Quality Tripod by AmazonBasics |
AmazonBasics 60-Inch Lightweight Tripod with Bag, 2-Pack | AmazonBasics Lightweight Mini Tripod, 4-Pack | AmazonBasics 50-Inch Lightweight Tripod with Bag, 4-Pack |
Similar items that may deliver to you quickly
- Monoprice Speaker Banana Plugs - 24k Gold Plated,Closed Screw Type, Color Coded, 20 PairsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Apr 3
- Sewell Silverback Banana Plugs, 24k Gold Dual Screw Lock Speaker Connector, 12 PairsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Apr 3
- WGGE WG-3333 24k Gold Plated Speaker Banana Plugs-Closed Screw Type (6 Pairs (12 Plugs))FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Apr 3
- Monoprice 109437 5PRJX74047 Gold Plated Speaker Banana Plugs – 5 Pairs – Open Screw Type, For Speaker Wire, Home Theater, Wall Plates And MoreFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Apr 3
- Monoprice 121821 24k Gold Plated Speaker Banana Plugs, Closed Screw Type (12 Pairs)FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Apr 3
- Monoprice Gold Plated Speaker Banana Plugs – 1 Pair – Closed Screw Type, For Speaker Wire, Home Theater, Wall Plates And MoreFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Apr 3
WARNING:
From the manufacturer
Banana plugs make speaker installation a breeze. They are designed for use with amplifiers or speakers that use traditional binding posts. Not only is it easier to make the connection on the back of your amp, it is safer, with no chance of stray wire strands creating a short across contacts. These high quality plugs are the closed screw type and can accept bare wire or spades. They are sized to fit speaker wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification. The plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections. This multi-pack includes five pairs of plugs, perfect for connecting the satellite and center channel speakers in a 5.1 channel setup.
- Can accept bare wire and spades
- Can accept 12 to 18 AWG speaker wires
- Color coded black/red rings for maintaining proper polarity
- Secure, positive contact with binding posts
- Corrosion resistant, 24K gold plated finish
- Brass body construction
- Each order includes five pairs (10 plugs total)
|
|
|
---|---|---|
Brass Body ConstructionThe plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections. |
Color Coded Black/Red Rings For Maintaining Proper PolarityEach pair comes with one plug color coded red and the other coded black, for easy polarity identification. |
Can Accept 12 To 18 AWG Speaker WiresThese high quality plugs are the closed screw type and can accept bare wire or spades. They are sized to fit speaker wire from 12 to 18 AWG. |
Compare with similar items
This Item Monoprice Gold Plated Speaker Banana Plugs – 5 Pairs – Closed Screw Type, For Speaker Wire, Home Theater, Wall Plates And More | Recommendations | dummy | dummy | dummy | dummy | |
Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | ||
Price | Currently unavailable. | $19.99$19.99 | -6% $33.99$33.99 Typical: $35.99 | $11.59$11.59 | $11.21$11.21 | $25.99$25.99 |
Delivery | — | Get it as soon as Wednesday, Apr 3 | Get it as soon as Wednesday, Apr 3 | Get it as soon as Wednesday, Apr 3 | Get it as soon as Wednesday, Apr 3 | Get it as soon as Wednesday, Apr 3 |
Customer Ratings | ||||||
Value for money | 3.4 | 4.4 | 3.9 | 4.4 | 4.2 | 4.5 |
Quality of material | 4.3 | — | 4.0 | 4.4 | 4.6 | 4.9 |
Easy to use | 3.4 | — | 3.5 | 4.5 | 4.5 | 4.5 |
Easy to install | 3.1 | 4.2 | — | 4.5 | 4.3 | 4.6 |
Sound quality | 4.0 | — | — | — | 4.5 | 4.6 |
Sold By | — | BlueRigger | KangeQhing | VCE LINK | HAGEN USA | MyLifeCenter |
connector type | Speaker Wire to Banana Plug | — | Screw | Banana Plug | Auxiliary | Screw |
connector gender | Male, Female | Male-to-Male | — | — | Male-to-Male | Male-to-Female |
gauge | 18 | 18 | 18 | 18 | 18 | 18 |
compatible devices | Speaker | — | Speaker | Audio/Video Receiver, Wall Plate, Amplifier, Surround sound system, 12 to 18 AWG speaker wire | Speaker | Home Theater , Audio,Amplifiers and Sound Systems |
What's in the box
Videos
Videos for this product
0:58
Click to play video
Customer Review: Better install technique
Evan Freer
Looking for specific info?
Product information
Brand | Monoprice |
---|---|
Connector Type | Speaker Wire to Banana Plug |
Compatible Devices | Speaker |
Recommended Uses For Product | Speaker |
Color | Gold |
Connector Gender | Male, Female |
Shape | Round |
Unit Count | 5 Count |
Item Weight | 5.12 ounces |
Gauge | 18.0 |
Indoor/Outdoor Usage | Outdoor, Indoor |
Number of Items | 1 |
Package Type | Standard Packaging |
Product Dimensions | 3.8 x 3.9 x 0.9 inches |
Item Weight | 5.1 ounces |
Manufacturer | Monoprice Inc. |
ASIN | B0097JLQVC |
Item model number | 109436 |
Customer Reviews |
4.3 out of 5 stars |
Best Sellers Rank | #20,605 in Electronics (See Top 100 in Electronics) #188 in Audio & Video Distribution Products |
Is Discontinued By Manufacturer | No |
Date First Available | September 8, 2012 |
Feedback
Product Description
Banana plugs make speaker installation a breeze. They are designed for use with amplifiers or speakers that use traditional binding posts. Not only is it easier to make the connection on the back of your amp, it is safer, with no chance of stray wire strands creating a short across contacts. These high quality plugs are the closed screw type and can accept bare wire or spades. They are sized to fit speaker wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification. The plug body is made of brass, which is then plated with gold to help prevent corrosion and ensure smooth connections. This multi-pack includes five pairs of plugs, perfect for connecting the satellite and center channel speakers in a 5. 1 channel setup.
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the quality, performance, and value of the banana plugs. For example, they mention that they look good, work well, and are a good investment for your home theater. That said, opinions are mixed on ease of assembly, fit, and connectivity.
AI-generated from the text of customer reviews
Customers like the quality of the electronic cable. They say it's well designed, well built, and provides a nice level of finish to their system. Customers also say the plugs look good and make good connections. Overall, customers are satisfied with the quality and functionality of the product.
"...These feel heavy and solid. Connected 5 speakers to receiver (10 pairs, 5 in speaker outputs, 5 in receiver inputs) with no issues" Read more
"...Sound quality didn’t diminish, they are pretty sturdy, and they are hefty. Great price for them too. Def. Recommend" Read more
"...Once attached, the wire/plug assembly is solid. The plugs are marked with a red or black band...." Read more
"...Looks not as nice as before (see photos), but results in very reliable connection." Read more
Customers like the performance of the cable. They say it works well, gets the job done effectively, and is good enough for most uses. Customers also mention that the banana plugs work great and are perfect for the job.
"...So I soldered my speaker wires to these, and the results have been awesome! Sturdy connections, no noise, no distortion...." Read more
"This is a product that gets the job done effectively, and at a good price...." Read more
"...Overall these work fine and stay plugged into the standard audio terminals on my speakers and Yamaha AV receiver...." Read more
"...They are unusable!2) Next, the banana plugs themselves comes as three pieces...." Read more
Customers like the value of the banana plugs. For example, they say they're a great investment for your home theater, and hefty.
"...Sound quality didn’t diminish, they are pretty sturdy, and they are hefty. Great price for them too. Def. Recommend" Read more
"...Well worth the money. Easy. Timesaving." Read more
"This is a product that gets the job done effectively, and at a good price...." Read more
"Just like the title. Great product for price. They are simple to use and screw down on the wires after you insert and fold about 1/8 inch over...." Read more
Customers like the sound quality of the electronic cable. They say the sound is decent and the speaker banana plugs are a great addition to any audio setup.
"...Sound quality didn’t diminish, they are pretty sturdy, and they are hefty. Great price for them too. Def. Recommend" Read more
"...them with 12 AWG Monoprice speaker wire, you cant ask more...high quality sound for your high end speakers." Read more
"...Voilà! The music came out of the ceiling speakers. Very crystal clear sound...." Read more
"...none of my (14 awg?) wiring fell through the bottom and it sounds good. so no complaints there...." Read more
Customers are mixed about the ease of assembly of the electronic cable. Some mention that they are pleased with the ease, while others say that it is not easy. They mention that the cables connect easily to the wire, screw together easily, and are color coded. However, some customers say that the lack of instructions was a little disappointing, and the installation is not simple.
"...Just watched 10 seconds of a video to see how it was done, very easy. These feel heavy and solid...." Read more
"They’re perfect! Easy to setup to existing setup and gold plated...." Read more
"...LOL I tried multiple times. Nothing I tried worked and there were no instructions...." Read more
"...Well worth the money. Easy. Timesaving." Read more
Customers are mixed about the fit of the audio cable. Some mention that it fits fine, while others say that it's not a great fit for their Micca MB42X speaker posts.
"...As mentioned by multiple other reviewers on Amazon, these banana plugs are a bit too small to securely hold 14-gauge speaker wires... yeah, I was..." Read more
"...Because of the design of these, they have no room to crimp and screw on the cable so your forced to nearly break your fingers in an attempt to..." Read more
"...They fit very well into various components and amps that I own...." Read more
"Good plugs, was able to fit 12AWG speaker wire. Was a little snug around the sheathing, but nothing to complain about...." Read more
Customers have mixed opinions about the connectivity of the cable. Some mention that it provides a good solid connection and minimizes the risk of damage, while others say that it makes it difficult to get a solid connection without the wire getting jammed up in the jack.
"Connected perfectly even for a first time banana plug user. Just watched 10 seconds of a video to see how it was done, very easy...." Read more
"Good solid part but there is no way to secure connection. Description says - Secure, positive contact with binding posts...." Read more
"...Looks not as nice as before (see photos), but results in very reliable connection." Read more
"...They 'rock' back and forth (when inserted) and thus create a non-permanent connection, again, seriously making these utter junk...." Read more
Customers are dissatisfied with the wire protection of the electronic cable. They mention that the wires are not well secured in it, the capture is weak, and the wire would get stuck. They also say that the speaker wires fell off as they screwed on. Customers also say the wire splits apart and bends over the threads. They say the piece that plugs into the receiver gets unscrewed and makes the connection loose.
"...This in effect breaks nearly every wire thread internally and then they breaks off inside. Absolute garbage...." Read more
"...I tried to redo it by unscrewing the head but it broke the wire tips inside the head of the clips, I had to cut a tiny section of the white wire..." Read more
"...The downside is that means the wire isn’t as securely connected to the plugs and they are prone to the wire slipping loose...." Read more
"...I found out, the advantages of the banana plus are (a) you can have any length of wire you want, (b) the bare wire can stay attached to the Lepai..." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Here's what I did:
1. Stripped wire off by about an inch, and tinned the exposed copper wire.
2. Unscrew the tip from the body and carefully tinned the inside top surface with a tiny bit of solder (careful not to let solder get onto the screw threads so I could get the tip back onto the body).
3. Screwed everything back together and tightened with pliers to ensure solid mechanical connections.
4. Stood the connector on its end by drilling a hole in a block of wood -- tip fits in diameter of hold so the connector stands upright with back end standing up.
5. Using soldering iron at around 450 degrees Celsius (hotter than most applications) and a very large chisel tip, heated up the connector at the opening for the wire, until solder is able to melt and go into the opening of the connector.
6. Filled the connector's opening with melted solder to the brim.
7. Maintaining soldering iron on the connector, insert tinned speaker wire into the opening of the connector right into the molten solder.
8. While maintaining wire in immobile position, set soldering iron aside until molten solder cools and hardens.
9. Cleaned off flux.
Wala!!! Solidly solder connection.
Drawback? The plastic red and black rings on are not meant for solder, so they start to melt when the connector reaches soldering temperature. Looks not as nice as before (see photos), but results in very reliable connection.
Reviewed in the United States on August 14, 2020
Here's what I did:
1. Stripped wire off by about an inch, and tinned the exposed copper wire.
2. Unscrew the tip from the body and carefully tinned the inside top surface with a tiny bit of solder (careful not to let solder get onto the screw threads so I could get the tip back onto the body).
3. Screwed everything back together and tightened with pliers to ensure solid mechanical connections.
4. Stood the connector on its end by drilling a hole in a block of wood -- tip fits in diameter of hold so the connector stands upright with back end standing up.
5. Using soldering iron at around 450 degrees Celsius (hotter than most applications) and a very large chisel tip, heated up the connector at the opening for the wire, until solder is able to melt and go into the opening of the connector.
6. Filled the connector's opening with melted solder to the brim.
7. Maintaining soldering iron on the connector, insert tinned speaker wire into the opening of the connector right into the molten solder.
8. While maintaining wire in immobile position, set soldering iron aside until molten solder cools and hardens.
9. Cleaned off flux.
Wala!!! Solidly solder connection.
Drawback? The plastic red and black rings on are not meant for solder, so they start to melt when the connector reaches soldering temperature. Looks not as nice as before (see photos), but results in very reliable connection.
After they plugs arrived, I could not figure out how the wire should be inserted in and attached to them. I did a Google search for videos about banana plugs and found several short videos. When you see a video, you get it immediately in seconds. Pages of instructions would be required otherwise. So, if you are new to banana plugs, a few minutes looking at videos will save you time.
The wire is inserted in the back of the barrell. Once attached, the wire/plug assembly is solid. The plugs are marked with a red or black band.
As I found out, the advantages of the banana plus are (a) you can have any length of wire you want, (b) the bare wire can stay attached to the Lepai amplifier as you reposition your speaker, and (c) you can disconnect the plugs from the speakers quickly. With bare wire, you have to unwrap the wire from a speaker pole, move the speaker and re-wrap the pole. The wire gets frayed and you have to cut off a segment, strip the wire, and wrap again. With the banana plugs, you remove the plug, move the speaker and insert the plug.
If you constantly attach and detach speakers, my guess is you will have to re-wire the banana plug. However, if you are like me and set the speakers up, you probably aren't going to move them anytime soon.
Well worth the money. Easy. Timesaving.
These closed plugs do a good job terminating / hiding the wire. They fit very well into various components and amps that I own.
INSTRUCTIONS to install / use them:
* Remove around 1" - 2" of the white casing to expose the red and white individual speaker wires
* Strip each wire so ~1/2" metal is showing
* Make sure the plug end is screwed in tightly (this does not need to come out)
* Unscrew the base of the plug from the other end
* WithOUT twisting the metal wiring, insert the wire (match wire color with plug color; start with either one) from the bottom of the plug until the metal sticks out the top
* Have ~1/4" metal hanging past the plug
* take the wiring and drape it down the sides of the plug (just the smooth side, do NOT cover any of the screw threading or it will be very hard to close it)
* Spread the draped wiring around the plug as evenly as possible (makes it easier to screw in later)
* Screw the two ends of the plug back together (the side with the draped wiring will go inside the plug)
* If you get stuck while screwing it back in, unscrew and adjust the wiring
* Repeat for the other side, and you're done!
Top reviews from other countries
Very easy to assemble, if you know what you’re doing. I had to read a bit about it before proceeding, but just like most things in life, once you know how to do it, it’s easier. Would have been nice to come with instructions, but here I am, writing them for free on here.
You’re welcome, Monoprice.
-Strip 1 cm of insulation, do not twist
-Unscrew bottom part of the plug
-Insert wire through the bottom piece, so that about 4mm stick out on the other side
-Flare out wire strands out like a flower and bend back down around the rim, but not the threads.
-Screw back the top part, twisting it as you insert. People complain about this part being removable - but that’s how it locks everything in place. Tighten all parts by hand or gently with pliers.
See photos. I posted them in order, but they get randomized by amazon. You get the idea
Reviewed in Canada on January 12, 2024
Very easy to assemble, if you know what you’re doing. I had to read a bit about it before proceeding, but just like most things in life, once you know how to do it, it’s easier. Would have been nice to come with instructions, but here I am, writing them for free on here.
You’re welcome, Monoprice.
-Strip 1 cm of insulation, do not twist
-Unscrew bottom part of the plug
-Insert wire through the bottom piece, so that about 4mm stick out on the other side
-Flare out wire strands out like a flower and bend back down around the rim, but not the threads.
-Screw back the top part, twisting it as you insert. People complain about this part being removable - but that’s how it locks everything in place. Tighten all parts by hand or gently with pliers.
See photos. I posted them in order, but they get randomized by amazon. You get the idea
Monoprice is hard to beat for quality components that are priced well.