I purchased these to build an Atari Punk Console and they have worked well. These potentiometers fit a standard breadboard for prototyping which is helpful.
The pots fit a standard size knob which means those can be customised which is useful
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Make it a bundle
We found 1 bundle with this item:
Taiss 30pcs 1K Potentiometer Variable Resistors 3 Terminals Linear Taper Rotary Audio B Type Potentiometer, Volume Control Potentiometer Shaft Length 15mm WH148 1K Ohm Potentiometer
Page 1 of 1Start overPage 1 of 1
-
Taiss 30pcs 1K Potentiometer Variable Resistors 3 Terminals Shaft Length 15mm + 100PCS Potentiometer knobs,Potentiometer Control Knobs,Plastic Knurled Shaft 6mm$14.99 $19.28This bundle contains 2 items
Frequently bought together
$9.29
Get it as soon as Friday, May 17
Only 8 left in stock - order soon.
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
From the brand
-
TAISS is an electronic technology limited company integrating, sales and integration. The company's main products include various industrial switches, relays, rectifiers, guitar knobs, fan capacitors, encoders and motorcycle accessories.
-
-
-
-
-
-
-
-
-
-
-
Product Description
Product name: Rotary Potentiometer（3 terminals, single linear (Type b)）
Potentiometer type:rotary potentiometer
knurled shaft.Shaft Length: 15 mm / 0. 6"
shaft diameter: 6 mm / 0. 2 inch
suits most standard knobs,Top adjustment Type and knurled shaft for easy operate in daily use time. Main used to control electrical devices such as volume controls
10K Potentiometer
60PCS Potentiometer Kit B5K 10K 20K 50K 100K
10PCS Potentiometer 10K
5PCS Potentiometer B10K
|
|
|
|
|
|---|---|---|---|
10K PotentiometerProduct name: 10K Potentiometer；model:wh148 10K ohm;type:rotary potentiometer. |
product sizeproduct size：Total dimensions:24mm x 16.8mm x24.5mm (0.94in x 0.66inx 0.96in);knurled shaft.Shaft Length: 15 mm / 0. 6";shaft diameter: 6 mm / 0. 2 inch;mounting thread diameter: 7 mm / 0. 28";base diameter: 16 mm / 0. 63". |
MaterialMaterial:metal, electronic parts, carbon film, not easily damaged. |
|
|
|
|
|
|
|---|---|---|---|---|
| 60PCS Potentiometer Kit B5K 10K 20K 50K 100K Ohm | 2016PCS Electronics Components Kit | 2pcs RV24YN20S 10K Potentiometer | 5pcs 10K Ohm Potentiometer | |
| Customer Reviews |
518
|
65
|
694
|
251
|
| Price | $11.99 | $39.99 | $11.99 | $9.99 |
| Product name: | Potentiometer Kit | Electronics Components Kit Assortment | Potentiometer 10K | Potentiometer 10K |
| Product model: | wh148 B5K 10K 20K 50K 100K Ohm | Resistor,Capacitors,Diode,LED,Potentiometer,Transistor,Voltage Regulator,PCB Board Prototype,Solderless breadboard,Rotary Encoder Module,Jumper Wire | rv24yn 20S/B103 | wh148 10k ohm |
| Type | rotary potentiometer | Electronics Components Kit | rotary potentiometer | rotary potentiometer |
|
|
|
|
|
|---|---|---|---|---|
| 100PCS Potentiometer knobs | 10pcs Potentiometer knob | 3pcs Potentiometer knobs | 2pcs Guitar Knob | |
|
|
||||
| Customer Reviews |
74
|
116
|
228
|
244
|
| Price | — | $8.66 | $7.99 | $9.99 |
| Product name: | Rotary Knob | Rotary Knob | Rotary Knob | Rotary Knob |
| Fit for Shaft Hole Dia | 6mm | 6mm | 6mm | 6mm |
| Material: | Plastic | Plastic, Metal | Metal | aluminum |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:45
Click to play video
wh148 1K 5K 10K 50K 100K 1M ohm potentiometer
SEA-GULL
Reviews with images
Workable, but you need to take care on your connections
The pins are too thin for Dupont connector to reliably attach to directly, soldering non-destructively is tricky, but I found a good method.I tried connecting Dupont female pins to these, but the connection it made was always terribly unreliable, due to how thin the pins are (the pins are not square, they are stamped sheet metal, correct width, but half the thickness needed)- the dupont connectors would slip sideways a little, lose their spring pressure, then just become electrically disconnected. I decided to then try soldering-I initially destroyed a few, attempting to directly solder wire to them- I was adding enough solder to build up a nice large bead on the pins, then attaching the wires. I was confused afterwards, on why the potentiometer was failing open-circuit, but found out that if any flux or solder made its way up the pin, and onto where the crimp was made for the pin to the PCB of the pot, it would cause that connection to intermittently fail (I assume the flux was acting like an insulator, and the crimp wasn't tight enough to keep solder from working its way under it).The solution I found, was to be very careful to only solder the tip of the pin, and to ensure no solder or flux ever made its way up to the end. To accomplish this, I used a female dupont connector as a fixture, inserted male dupont pins into it, then soldered the ends of the male dupont pins to the very tips of each pin (see picture).
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on July 29, 2023
Size: 100KVerified Purchase
Arrived sooner than expected, I have only tested one of the 30 potentiometers which performed as expected. Good product at exceptional cost
Images in this review
Reviewed in the United States on February 4, 2023
I tried connecting Dupont female pins to these, but the connection it made was always terribly unreliable, due to how thin the pins are (the pins are not square, they are stamped sheet metal, correct width, but half the thickness needed)- the dupont connectors would slip sideways a little, lose their spring pressure, then just become electrically disconnected. I decided to then try soldering-
I initially destroyed a few, attempting to directly solder wire to them- I was adding enough solder to build up a nice large bead on the pins, then attaching the wires. I was confused afterwards, on why the potentiometer was failing open-circuit, but found out that if any flux or solder made its way up the pin, and onto where the crimp was made for the pin to the PCB of the pot, it would cause that connection to intermittently fail (I assume the flux was acting like an insulator, and the crimp wasn't tight enough to keep solder from working its way under it).
The solution I found, was to be very careful to only solder the tip of the pin, and to ensure no solder or flux ever made its way up to the end. To accomplish this, I used a female dupont connector as a fixture, inserted male dupont pins into it, then soldered the ends of the male dupont pins to the very tips of each pin (see picture).
Size: 10KVerified Purchase
Workable, but you need to take care on your connections
Reviewed in the United States on February 4, 2023
The pins are too thin for Dupont connector to reliably attach to directly, soldering non-destructively is tricky, but I found a good method.Reviewed in the United States on February 4, 2023
I tried connecting Dupont female pins to these, but the connection it made was always terribly unreliable, due to how thin the pins are (the pins are not square, they are stamped sheet metal, correct width, but half the thickness needed)- the dupont connectors would slip sideways a little, lose their spring pressure, then just become electrically disconnected. I decided to then try soldering-
I initially destroyed a few, attempting to directly solder wire to them- I was adding enough solder to build up a nice large bead on the pins, then attaching the wires. I was confused afterwards, on why the potentiometer was failing open-circuit, but found out that if any flux or solder made its way up the pin, and onto where the crimp was made for the pin to the PCB of the pot, it would cause that connection to intermittently fail (I assume the flux was acting like an insulator, and the crimp wasn't tight enough to keep solder from working its way under it).
The solution I found, was to be very careful to only solder the tip of the pin, and to ensure no solder or flux ever made its way up to the end. To accomplish this, I used a female dupont connector as a fixture, inserted male dupont pins into it, then soldered the ends of the male dupont pins to the very tips of each pin (see picture).
Images in this review
