I have been using these reusable capsules since November 2017. I have Nespresso Latissima Pro and Nespresso Inissia machines. First, I did a few tries using the empty capsules without and with the lid seals and rubber seals. First, the rubber seal must be installed. The lid seal is thinner than the original nespresso pod lids. It is easily broken by the water pressure. These capsules fit well in my machines. No problems like others are reporting on their reviews with their machines.
Before I use these capsules with coffee, I study the reviews and comments. My conclusion was that for a successful use of these capsules, I have to have the proper combination of the following components: coffee beans roast, grinding level (granularity), amount of coffee, and packing pressure in the capsule. First, the coffee beans. Coffee beans have to be roasted for espresso. Other mild roasting levels could be used for extracting ristreto drinks, not espresso or lungo per Nespresso standards. Second, the grinder, it has to be conical burr grinder. I was able to get a Breville BCG600SIL conical burr grinder. Next, grinding setting on the grinder. I started with 12.5 setting in my BCG600SIL. Then I compared it with the grains of an original Nespresso pod. It was closed enough. From 12.5, I went down and up to find an optimal setting. Then, the most difficult part, packing pressure and coffee amount in the capsule. Doing this by hand, there are millions of combinations when we add all of these variables: grain level, grains amount, and packing pressure. So, I had to be patient and consistent with my testing. Too much pressure and amount, the machine is obstructed and almost no coffee is extracted. Too light pressure and the extraction is weak and watery. But, there is a sweet spot where I got what was acceptable to me for espresso extraction. Great flavor and good amount of crema. I was looking to get the same amount and brewing rate from the capsule.
After two months of use, I am getting closer to get consistent results every time.
One note, coffee beans don't have to be flavored or oily beans. That is just another problem for the grinder. Always use external syrups for flavoring your coffee.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Additional Details
Verified by Transparency
The brand applies a unique Transparency code to each item. We verify this code before shipping. You can verify this code using the Amazon Shopping app to confirm it comes from the brand and view additional product details.
Verified by Transparency
Each item has a unique code that we verify before shipping.
Add a debit or credit card to save time when you check out
Convenient and secure with 2 clicks. Add your card
Frequently bought together
$24.35
Get it as soon as Monday, May 13
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
Product Description
- Attention 1: Recap reusable coffee pod compatible with Nespresso Originalline is designed to be shorter than the original pods to avoid damaging the blade plate, please be careful when put It in the machine. Otherwise, the reusable coffee pod just falls through.
- Attention 2: Please keep in mind that clean the tray of your machine after every brewing, or the stainless steel cup mixed with those original ones.We suggest you clean the reusable coffee Original pod when it cool down, but not too long, then you will find it’s very easy to peel off the lid, no stick left on the rim.
- Compatible with nespresso originalline machine: essenza en85,Essenza Mini machine,Lattissima Pro, Compatible with breville bec720blk,Pixie C60, Compatible with DeLonghi Lattissima Pro, Compatible with breville creatista model bne600rch, Compatible with Brevelle Creatista Plus BNE800BSS and Creatista Plus,Lattissima Touch,U&Umilk, Essenza mini, Most of Inissia Series, Most of Pixie Series, CitiZ &CitiZ Milk, Gran Maestria & Maestria, Concept, Most of Le Cube,Silver and Compatible with Williams Sonoma Signature Capsule Coffee Maker.
- Not Compatible with: Dolce Gusto, Essenza C100, Not Compatible with Vertuoline, Krups CITIZ TYPE XN 7006,Citiz C110, Inissia C40,Le Cube D185 & C185,Krups CitiZ XN740B, Not Compatible with Breville CitiZ BEC620RED, C190 and D150 and Not Compatible with Delonghi Latissima + 520B.
- Attention: Please double check whether your coffee machine is compatible with the brands in the above list or not before buying. If you are still not confirmed, please reach us through amazon first.
- Make sure first if there is a silicone ring around the top of the reusable coffee Original pod,or the pressure would cause water leaking.
- Very easily to remove the aluminium cap after brewing, you would love it.
- Item Included: 3*refilling Pods compatible with Nespresso Originalline+ 120*foil Seals(Diameter:37mm) + 1*Tamper + 1*Plastic Scoop + 1*Brush.
Usage Attention 1
Do not fill the grinder fully!
Use the scoop(5g) to fill your refilling pod. We suggest filling about 6-7g grinds, leaving about 1-2MM space from the top, which would not cause the water-leaking and produce more pressure to get a better Espresso.
Our refilling Original pod is specially designed shorter than the original pods in height to avoid damaging the blade plate of the machine, Please be careful when put It in the machine, or the refilling pod just falls through.
Usage Attention 2
1. Please try several times to find your favorite coffee brand grinds. medium and fine, or Illy or LAVAZZA. Coffee grinds is the key to the taste of the Espresso.
2. In case you do not know if Recaps cap works well, we suggest you empty original pod, to fill its grinds to RECPAS pod to test the espresso it produce.
3. Do not over grind the beans too fine which may come out a diluted Espresso.
4. Do not super press the coffee grinds like those who work in coffee shops with a commercial half-manual coffee machine, just slightly press.
Usage Attention 3
How to Get a Nice Espresso? Please Take the Following Three Tips:
1) It is Worthy Trying to Figure out the Best Amount of Coffee to Use. We Recommend Using Medium or Fine Grinds Generally. You Can Try Some LAVAZZA , illy or Some Other Brands Grinds to See the Difference. We Have Tried the Lavazza and illy Ground Coffee , We Found that the Creama it Produced was Very Similar to the Original Pod. Or You Can Also Try to Pour out the Ground Coffee in the Original Pod and put it on Our pod, Which Can Produce Beautiful Creama.
2) Making Sure First that There is a Silicone Ring Around it. Without That Ring, Water will Come out for the First Drops Instead of Espresso.
3) We Recommend Filling about 6-7g Grinds , Leaving about 1-2MM Space from the Top, Which will Give More Pressure to Produce a Better Espresso with Beautiful Creama. Use the Tamper and Only Apply the Pressure of the Weight of the Tamper, Do not Tamp it Too Tight, Which Would Cause Very Small or Even No Drops.
Product Features and Usage Notes
Refilling Original Pods and tamper are made of #304 stainless steel,life-time use.
Food-Grade material.
We suggest you clean the pod when it cool down, but not too long, which you will find its very easy to peel off the foil lid, no stick left on the rim.
The espresso is similar to the original one.
Please try several times to find your favorite coffee brand grinds. medium and fine, or Illy or LAVAZZA. Coffee grinds is the key to the taste of the Espresso.
From the brand
RECAPS Reusable Coffee Filter
-
We are A Small Group Focused on Offering Refillable Capsules for Espresso Lovers. We Develop, Make Toolings and Produce Both Stainless Steel and Plastic Capsules Ourselves.Our Mission is to Offer as Much as We Could under The Concept of "Save, Green and Fun".
Recaps = Re + capsule, which Means Continuous Circulation, Green and Reusable, Which is the Mission We Adhere to.
-
-
-
-
-
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:09
Click to play video
Review of RECAPS Reusable Capsules for Nespresso
Pura Vida
Videos for this product
3:58
Click to play video
Great style and good for the price!
Jean Marie Duplessy
Compare with similar items
This Item  RECAPS Reusable Coffee Filter Capsules Compatible with Nespresso Original 3PCS Refillable Coffee Pods Permanent Coffee Filter Stainless Steel 120PCS Aluminum Foil Lids Coffee Tamper |  |  |  |  |  | |
| Price | -10% $24.35 List: $26.99 | $24.98 | $26.95 | $12.99 | -5% $18.99 List: $19.99 | $18.99 |
| Delivery | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 |
| Customer Ratings | ||||||
| Easy to clean | ||||||
| Easy to use | ||||||
| Flavor | ||||||
| Value for money | ||||||
| Sold By | RECAPS | CAPMESSO | TriplotDirect | Easylife1210 | Easylife1210 | Lucky Cheng Yu |
| compatible devices | Nespresso Original Line | Nespresso Originalline Machine | Nespresso Original Line Machine | Krups | Krups, Delonghi, Breville | Nespresso Original Line Machine |
| material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel, Silicone, Aluminum | Stainless Steel, Aluminum | Stainless Steel |
| number of pieces | 3 | 108 | 100 | 2 | 6 | 1 |
| shape | Disk | Basket | Basket | Basket | Basket | Basket |
Reviews with images
I have excellent results using these capsules with Nespresso machines.
I have been using these reusable capsules since November 2017. I have Nespresso Latissima Pro and Nespresso Inissia machines. First, I did a few tries using the empty capsules without and with the lid seals and rubber seals. First, the rubber seal must be installed. The lid seal is thinner than the original nespresso pod lids. It is easily broken by the water pressure. These capsules fit well in my machines. No problems like others are reporting on their reviews with their machines.Before I use these capsules with coffee, I study the reviews and comments. My conclusion was that for a successful use of these capsules, I have to have the proper combination of the following components: coffee beans roast, grinding level (granularity), amount of coffee, and packing pressure in the capsule. First, the coffee beans. Coffee beans have to be roasted for espresso. Other mild roasting levels could be used for extracting ristreto drinks, not espresso or lungo per Nespresso standards. Second, the grinder, it has to be conical burr grinder. I was able to get a Breville BCG600SIL conical burr grinder. Next, grinding setting on the grinder. I started with 12.5 setting in my BCG600SIL. Then I compared it with the grains of an original Nespresso pod. It was closed enough. From 12.5, I went down and up to find an optimal setting. Then, the most difficult part, packing pressure and coffee amount in the capsule. Doing this by hand, there are millions of combinations when we add all of these variables: grain level, grains amount, and packing pressure. So, I had to be patient and consistent with my testing. Too much pressure and amount, the machine is obstructed and almost no coffee is extracted. Too light pressure and the extraction is weak and watery. But, there is a sweet spot where I got what was acceptable to me for espresso extraction. Great flavor and good amount of crema. I was looking to get the same amount and brewing rate from the capsule.After two months of use, I am getting closer to get consistent results every time.One note, coffee beans don't have to be flavored or oily beans. That is just another problem for the grinder. Always use external syrups for flavoring your coffee.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 12, 2018
Before I use these capsules with coffee, I study the reviews and comments. My conclusion was that for a successful use of these capsules, I have to have the proper combination of the following components: coffee beans roast, grinding level (granularity), amount of coffee, and packing pressure in the capsule. First, the coffee beans. Coffee beans have to be roasted for espresso. Other mild roasting levels could be used for extracting ristreto drinks, not espresso or lungo per Nespresso standards. Second, the grinder, it has to be conical burr grinder. I was able to get a Breville BCG600SIL conical burr grinder. Next, grinding setting on the grinder. I started with 12.5 setting in my BCG600SIL. Then I compared it with the grains of an original Nespresso pod. It was closed enough. From 12.5, I went down and up to find an optimal setting. Then, the most difficult part, packing pressure and coffee amount in the capsule. Doing this by hand, there are millions of combinations when we add all of these variables: grain level, grains amount, and packing pressure. So, I had to be patient and consistent with my testing. Too much pressure and amount, the machine is obstructed and almost no coffee is extracted. Too light pressure and the extraction is weak and watery. But, there is a sweet spot where I got what was acceptable to me for espresso extraction. Great flavor and good amount of crema. I was looking to get the same amount and brewing rate from the capsule.
After two months of use, I am getting closer to get consistent results every time.
One note, coffee beans don't have to be flavored or oily beans. That is just another problem for the grinder. Always use external syrups for flavoring your coffee.
I have excellent results using these capsules with Nespresso machines.
Reviewed in the United States on January 12, 2018
I have been using these reusable capsules since November 2017. I have Nespresso Latissima Pro and Nespresso Inissia machines. First, I did a few tries using the empty capsules without and with the lid seals and rubber seals. First, the rubber seal must be installed. The lid seal is thinner than the original nespresso pod lids. It is easily broken by the water pressure. These capsules fit well in my machines. No problems like others are reporting on their reviews with their machines.Reviewed in the United States on January 12, 2018
Before I use these capsules with coffee, I study the reviews and comments. My conclusion was that for a successful use of these capsules, I have to have the proper combination of the following components: coffee beans roast, grinding level (granularity), amount of coffee, and packing pressure in the capsule. First, the coffee beans. Coffee beans have to be roasted for espresso. Other mild roasting levels could be used for extracting ristreto drinks, not espresso or lungo per Nespresso standards. Second, the grinder, it has to be conical burr grinder. I was able to get a Breville BCG600SIL conical burr grinder. Next, grinding setting on the grinder. I started with 12.5 setting in my BCG600SIL. Then I compared it with the grains of an original Nespresso pod. It was closed enough. From 12.5, I went down and up to find an optimal setting. Then, the most difficult part, packing pressure and coffee amount in the capsule. Doing this by hand, there are millions of combinations when we add all of these variables: grain level, grains amount, and packing pressure. So, I had to be patient and consistent with my testing. Too much pressure and amount, the machine is obstructed and almost no coffee is extracted. Too light pressure and the extraction is weak and watery. But, there is a sweet spot where I got what was acceptable to me for espresso extraction. Great flavor and good amount of crema. I was looking to get the same amount and brewing rate from the capsule.
After two months of use, I am getting closer to get consistent results every time.
One note, coffee beans don't have to be flavored or oily beans. That is just another problem for the grinder. Always use external syrups for flavoring your coffee.
Images in this review
Reviewed in the United States on April 5, 2022
Reviewed in the United States on July 1, 2020
I use a very good grinder (Krups) and grind the Lavazza beans till I have a nice fine powder. I fill it per the instructions, I even played around with it, 1/2 full, 3/4 full and 100% full. No matter what I do, more than 1/2 the coffee (water) ends up in the tray that is meant to catch the caps when you lift the handle. At first I thought my Nespresso machine was broken and leaked water all over the counter top, until I realized the reason why I am getting so little pour into my cup was because more than 1/2 the water never made it into the cup but in stead ended up in the tray. In my opinion this is because of bad design or bad manufacturing. They must know this because why else would they provide two different type (color) rubber bands that you have to place around the capsule to prevent it from leaking water. They must have had many complaints about this and their solution is to add a rubber band - which for the record does not work. Watch my video which I have attached. I mean really, why can a company such as Lavazza manufacture a plastic capsule that works beautiful and never leaks, but this stainless steel cap leaks! Unacceptable. The leaking has nothing to do with how fine your coffee is grinded or how full you fill the cap, it is just plain bad design or manufacturing. If caps typically leak and need rubber bands to stop them from leaking all caps, no matter the manufacturer would have had the same problem.
Images in this review
Reviewed in the United States on January 6, 2018
Top reviews from other countries
Antonio González Martínez
Buena calidad y fácil uso.
Reviewed in Mexico on July 31, 2023Pedro B
Excelente capsula recarregável para Nespresso comum
Reviewed in Brazil on January 12, 2022
