HUANYANG VFD
HY01D523B 1ph in 3ph out 0-220 vac
1.5Kw (2hp) 0.50hz- 400.0hz Output current 7.0 A
Motor Leeson C184T11FB10C
3ph 208-230 v 60 Hz 2 Hp (1,5kw)
FLA 7.2 SFA 7.8 Eff. 86.5% 6 Poles
Notes: VFD Settings varies from a company to another
Steps for programming the parameters.
1) Press “Program”
2) Press “Up” or “Down” arrows to get to the parameter you want.
3) Press “Set” to select the parameter for editing.
4) Press “Up” or “Down” arrows to enter the setting you want.
5) Press “Set” to lock in the new parameter value
*Note: The “Shift” button changes the input position from right to left across the display.
Parameter Value My Explanation
PD000 0 0 = Allows VFD parameters to be adjusted
1 = Prevents VFD parameters from being adjusted
PD013 0 8 = Reset VFD to factory settings (if necessary)
PD001 1 0 = Start/Stop motor by buttons on the front of the drive.
1 = Start/Stop motor by external switch
2 = Start/Stop motor by computer communication port"
PD002 1 0 = Motor Speed adjusted by buttons on the front of the drive
1 = Motor Speed adjusted by potentiometer (Onboard or external,
jumper on “VI” for external or “VR” for onboard)
2 = Motor Speed adjusted via computer communication port"
PD005 60 The maximum frequency that the drive will send to the motor.
PD004 60 Rated frequency of the motor as listed on the motor's nameplate.
PD003 60 The frequency (speed) the motor starts off at when PD002 is set to 0 .
PD008 220 Rated voltage of the motor as listed on the motor's nameplate
PD014 2.0 Time in seconds for motor to accelerate to full speed.
PD015 2.0 Time in seconds for motor to decelerate to complete stop.
PD023 1 0 = Reverse motor rotation not allowed.
1 = Reverse motor rotation is allowed.
PD070 0 0 = 0-10V for external potentiometer Ref PD002
PD072 60 Higher analog frequency Same as PD005 (Factory set a 400hz not 50hz)
PD141 220 Rated voltage of the motor as listed on the motor's nameplate.
PD142 7 Set it to VFD max rating. F.L.A. (Full load amp) rating of the motor
as listed on the motor's nameplate.
PD143 6 Number of poles = 120(f)/n where f = motor's rated operating frequency
(60Hz in the USA) and n = motor's rated RPM on the nameplate.
120 factor x 60 HZ divide by 1165 rpm = 6,180 rounded to 6
PD144 1165 Rated RPM of the motor as listed on the motor's nameplate.
| Manufacturer | Huanyang Electrical |
|---|---|
| Part Number | HY02D223B |
| Item model number | HY02D223B |
| Is discontinued by manufacturer | No |
| Size | 220V AC 1/3 Phase input-2.2kw |
| Colour | 2.2kw |
| Style | 220v 1 or 3 phase AC input-2.2KW |
| Material | Electronic component |
| Power Source | ac |
| Voltage | 220 Volts |
| Wattage | 1.5 KW |
| Amperage Capacity | 10 Amps |
| Item Package Quantity | 1 |
| Cutting Diameter | 20 Centimeters |
| Certification | CE |
| Special Features | The parameter function of this unit drive is diversified,If the change to the parameter is not certain enough,please be sure to contact me. |
| Included Components | electronic components |
| Batteries Included? | No |
| Batteries Required? | No |
| Assembled Diameter | 20 Centimeters |
| Item Weight | 1.54 kg |
