I, much like many other xiaomi m365 scooter owners, was irritated with my tire repeatedly losing pressure. I replaced the tire twice with no luck, I even replaced the tire valve stem gasket, and the tire still lost air. I was convinced the wheel must’ve been cracked or some issue that just wouldn’t allow air to be kept in the tire - so I opted for a solid tire. Every single installation involved using heavy lubricant, vise grips, and boiling the tire or microwaving it for almost half an hour. I just gave up after two days worth of effort and not being able to fit the tire on the wheel and said why not buy the whole wheel with tire included. In literally a quarter of the time it took me to just take the tire off - I had the wheel off and this replacement in.
No instructions are provided as to how to replace the motor unit so here are some rough instructions:
18mm wrench, T10 torx screwdriver, and an Alan key are required.
1. Remove the front wheel stickers by using a blade or flathead
2. Behind sticker are 2-4 screws that can be removed using an Alan key. Remove those covers and the 4 screws behind those.
3. Now your scooter on its back to expose the battery compartment, and remove the 17 T10 screws.
4. Once the back is off, remove the 3 elbow wires colored (Blue, Brown, Yellow) and the middle wire on the left side of the controller (RYGBB).
5. Remove the red gasket holding in the wires that connect to the wheel and pull the wire shielding out.
6. Take your 18mm wrench and remove bolts from both sides of the front wheel.
7. Install wheel by following instructions in reverse. Fishing wires through using a zip tie or coat hanger may help. The wheel may come with a GREEN wire instead of a brown wire - just push the green elbow wire where the brown went instead.
| Manufacturer | Goick |
|---|---|
| Brand | Goick |
| Item Weight | 6.85 pounds |
| Product Dimensions | 9.84 x 9.84 x 2.76 inches |
| Manufacturer Part Number | Goickrgo5un7dzg |
