Used to connect 12-volt trigger from a A/V Receiver (Denon but another's work the same) to flip the input switch on a Pyle Ps1000 power sequencer. The sequencer powers up my sub-amps and other devices I want to power-on when I power on the receiver. Just wired ground and 12-volt from the mono-mini audio output connect (trigger out) to the ground and 12-volt on the switch. Lights it up and shows it is working. Wired ground and red-wire (sorry not sure on the pin-out 4 DIN input cable that came with the Ps1000 but testing it manually was easy) into the Ps1000 switch input and it does the trick so far super reliably. Would be nice if this has a little case to keep the switch in - it is just sitting on the shelf behind my A/V equipment.
| Connector Type | Terminal Leads |
|---|---|
| Contact Material | Silver |
| Contact Type | Normally Open, Normally Closed |
| Current Rating | 10 Amps |
| Mounting Type | Screw Mount |
| Brand | HiLetgo |
| Operation Mode | Automatic |
| Coil Voltage | 12 Volts |
| Contact Current Rating | 10 Amps |
| Maximum Switching Current | 10 Amps |
| Maximum Switching Voltage | 250 Volts |
| Minimum Switching Voltage | 12 Volts (DC) |
| Specification Met | Vcc |
| UPC | 702082655955 |
| Manufacturer | HiLetgo |
| Item Weight | 0.317 ounces |
| Package Dimensions | 2.44 x 1.42 x 0.75 inches |
| Item model number | 3-01-0341 |
| Is Discontinued By Manufacturer | No |
| Color | Red |
| Material Type | lead |
| Size | Small |
| Manufacturer Part Number | 3-01-0341 |
