Manufacturer | Qunqi |
---|---|
Part Number | MK-050 |
Item Weight | 1.12 ounces |
Product Dimensions | 1.14 x 0.98 x 0.75 inches |
Item model number | CECOMINOD012186 |
Is Discontinued By Manufacturer | No |
Material | ABS |
Voltage | 12 Volts |
Wattage | 25 watts |
Item Package Quantity | 1 |
Batteries Included? | No |
Batteries Required? | No |
L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
- High working power to 35v,large current can reach 3A MAX and continue current is 2A, power to 25w.
- Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Similar items that may ship from close to you
- HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- 4 PACK L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power Compatible with Arduino UNO MEGA R3 Mega2560Amazon's Choicein Single Board ComputersFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- DAOKI 2 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 with Dupont CableFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- Emo Smart Robot Car Chassis Kit with Motors, Speed Encoder and Battery Box for DIYAmazon's Choicein Educational Science KitsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- ELEGOO 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Ribbon Cables Kit Compatible with Arduino ProjectsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
- DROK DC Motor Driver, L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler IsolationAmazon's Choicein Motor Speed ControllersFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Wednesday, Mar 27
Product Description
Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino
- Specification:
- Chip: L298N
- Logic voltage: 5V
- Logic current 0mA-36mA
- Storage Temperature: -20 ℃ to ℃ to +135
- Operating mode: H-bridge driver (dual)
- Drive voltage: 5V-35V
- Drive current: 2A (MAX single bridge)
- Maximum power: 25W
- Dimensions: 43x43x27mm
Note:
- This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
- DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
- When ENA enable IN1 IN2 control OUT1 OUT2
- When ENB enable IN3 IN4 control OUT3 OUT4
Package include:
- 1x L298N Module
Detail Picture:
Looking for specific info?
Product information
Technical Details
Additional Information
ASIN | B014KMHSW6 |
---|---|
Customer Reviews |
4.5 out of 5 stars |
Best Sellers Rank | #651 in Single Board Computers (Computers & Accessories) |
Date First Available | October 31, 2013 |
Warranty & Support
Feedback
Important information
25 watts
12 volts
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the motor controller's compactness, saying it's small enough to mount anywhere. They also appreciate the large heat sink and say it can handle multiple motors. However, some customers have reported that the heat sinks get very hot when loaded heavy. Opinions are mixed on quality.
AI-generated from the text of customer reviews
Customers like the performance of the board. For example, they mention it works well, is excellent, and powers motors. Some say the 5 volt output was 5.6 which was too much to power. Overall, most are happy with the performance and functionality of the product.
"...These worked great for my applications, and I continue to use them years after I first bought them...." Read more
"Think about the size of your project for this one. It works pretty well, but would be best on a medium-sized project...." Read more
"...for a sim racing project to add vibration motors to my pedals and they work great...." Read more
"Worked well powering the motors but the 5 volt output was 5.6 which was to much to power the raspberry pico" Read more
Customers find the tool easy to work with and implement. They say it provides easy-to-follow examples and code, and is easily programmed with Arduino. Customers also mention that the board is simple and cheap, making it efficient. They also appreciate the tutorials and helpful guides.
"Very easy to use" Read more
"...Would buy it again, it's a great value and its limitations can easily be handled with a little software." Read more
"...Simple system, and very cheap and efficient." Read more
"...There are many tutorials and helpful guides. Also, FOR THE LOVE OF GOD, if are getting this you need to make sure you get jumper wires...." Read more
Customers like the motor. They mention it runs two motors under computer control perfectly, can control multiple motors, and even control the speed. The motor controller is able to easily power two motor per side when supplied 12v, and comes with not one, but two reversing motors. It makes it easy to control a couple of DC motors with an Arduino that it was well worth the price.
"...and comes with not one, but TWO reversing motors. Simple system, and very cheap and efficient." Read more
"Wanted to use it for a fountain that would shoot streams. Nice little pump. Turn ON & Off were too slow for my plan." Read more
"...This motor controller was able to easily power 2 motors per side when supplied 12v. Worked perfectly." Read more
"...It made it so easy to control a couple of DC motors with an Arduino that it was well worth the money (which was not a lot to begin with)...." Read more
Customers like the compactness of the tool. They mention it's reliable, easy to wire, and small enough to mount anywhere. Some say that it'll work well for small motors that don't draw excessive current. The heat sink is nice and large, making it easy to fit the module into a space.
"...As far as quality, the heat sink is nice and large but makes fitting the module into tight spaces a bit difficult...." Read more
"...Easy to wire, small enough to mount anywhere. It's been almost a year now since my build and it is still working great." Read more
"Compact, reliable and easy to use." Read more
"Big, but easy to use!..." Read more
Customers appreciate the value of the motor controller. They say it is a great part at a reasonable price.
"...Would buy it again, it's a great value and its limitations can easily be handled with a little software." Read more
"...Simple system, and very cheap and efficient." Read more
"...to control a couple of DC motors with an Arduino that it was well worth the money (which was not a lot to begin with). Product arrived quickly also...." Read more
"Great part at a great price." Read more
Customers find the online resources for the tool to be helpful. They mention that there are several articles, videos, and great documentation to help them use the tool.
"There's alot of great documentation on these for use with Arduino, which made it extremely easy to drive my giant 12 volt DC gear motors...." Read more
"...There are plenty of online resources which explain the available features and provide easy to follow examples and code." Read more
"Does exactly what it is supposed to do. Great product. Several articles and videos available on line to help use it." Read more
Customers are mixed about the quality of the tools. Some mention it's reliable, solid, and just as described. However, others say that it'll break easily and the build quality is questionable.
"I almost gave this 3 stars, but because of its reliability, I decided on 4. The thing works great with raspberry pis...." Read more
"...The screw terminals are a little loose and sloppy on the board, meaning careful they will shift when you use the screws...." Read more
"...I'd call that a very rugged device." Read more
"...I was powering mine with 11v, the built in regulator fried and broke the driver and my arduino." Read more
Customers are not satisfied with the heat produced by the tools. They mention that the heat sinks get very hot when loaded heavy.
"...That works fine, but the regulator gets very hot when doing that regardless of the current draw...." Read more
"...Be advised, when loaded heavy, these heat sinks will get very hot." Read more
"...Works great so far. Does get pretty hot when pushing a stepper. I used fan for cooling. Plenty of online documentation for setup" Read more
"Overheats and shuts off..." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Anyway, this is embedded in a water treatment system to microdose my outside water connections (hoses and sprinklers) with polyphosphate to sequester iron. It runs whenever we use outside water and has been a reliable core part of the system for more than nine months now. Would buy it again, it's a great value and its limitations can easily be handled with a little software.
Top reviews from other countries
Io lo alimento a 12volt e utilizzio i 5 volt forniti per alimentare arduino.